C Profile C Channel Cross Bar Cable Ladder Rung Roll Forming Machine
The c-shaped steel purlin(C purlin roll forming machine) has good bending and compressive properties, good straightness, automatic fixed-length cutting, automatic punching, high degree of automation, high installation is fast and convenient. It has the following characteristics: the material and hardness of the press wheel of C section steel purlin (generally bearing steel, hardness between 57℃ and 58℃); see the number of channels of the whole C section steel wheel generally should not be less than 3 channels; see the number of channels of the total press shaft of C section steel generally should not be less than 12 channels; see the straightness of the pressed C section steel and the size of the ruler angle. (Steel frame roll forming machine)
C-shaped steel purlins(C profile roll forming machine) are made of bearing steel (GR15), forged and annealed; the base is made of 310H steel; the lower five and upper four courses of levelling are used to ensure flatness; the secondary forming type is used to ensure the squareness and right angles of the product, and the size of the upper edge can be made. The thickness of the rolled material is 1.5mm-3mm (thickness can also be designed according to user requirements).
| C Profile C Channel Cross Bar Cable Ladder Rung Roll Forming Machine |
| Component 1 | Hydraulic uncoiler with leveler | 5.5kw+3kw |
| Component 2 | Servo feeder | Yaskawa 1.9kw |
| Component 3 | Press machine | JH21-45 |
| Component 4 | Roll forming machine | 14 forming stands 11kw Cast iron stands Gearbox drive |
| Component 5 | Hydraulic tracking shear | Cut any length 5.5kw Yaskawa servo motor |
| Component 6 | Control panel*2 | Siemens PLC |
| Component 7 | Hydraulic station | 5.5kw |
Flow chart of C profile C channel Cross bar Cable ladder rung roll forming machine:
Hydraulic decoiler with leveler--Servo feeder with press machine--Guiding--Roll forming machine--Flying hydraulic cut--Out table
The small size of the C section is used for many purposes, generally small size one size one equipment, because the smaller the size of the profile, the smaller the size of the rollers, not suitable for the production of large size. This production line is used to produce cable ladder rungs, and the customer requires high speed, so it uses the cast iton stands with gearbox drive, which is very necessary when the customer requires fast speed or thickness 3-3.5mm.
Pictures of C profile roll forming machine
Product Tags:
|
|
C Profile C Channel Roll Forming Machine 1.5-2mm Flying shear Images
|
